Special Spectral Graphite Electrode for Scientific Research and Experiment Graphite Electrode

• Customization: Available
• Application: Smelting Steel
• Carbon Content: High-Carbon
• Model NO.: graphite electrode
• Product Name: Graphite Electrode
• Material: Petroleum Coke
• Resistance (μΩ.M: 4 - 9 Micro
• Nipple: 3tpi/4tpi/4tpil
• Length: 1600~3000mm
• Apparent Density (G/Cm³ ): 1.58 - 1.76 G/Cc
• Type: Graphite Electrodes
• Composition: SiC
• Grade: UHP
• Forming Way: Extruded Graphite
• Crystal Morphology: Compact Crystalline Graphite
• Transport Package: Regular or According to Customer Requirements
• Specification: Regular or according to customer requirements
• Trademark: FK
• Origin: China
• HS Code: 8545110000
• Production Capacity: 5000mt/Month

Product Description

Products Detail:

Graphite electrode refers to a kind of high-temperature resistant graphite conductive material, which is made of
petroleum coke and asphalt coke as aggregates and coal tar pitch as binder through raw material calcination,
crushing and grinding, batching, kneading, molding, baking, impregnation, graphitization and mechanical processing.
It is called artificial graphite electrode (graphite electrode for short), to distinguish it from natural graphite electrode
prepared with natural graphite as raw material.
 

Processing Program:

1) The graphite is immersed in oil. Before machining,
the graphite material should be immersed in the engine
oil for tens of hours to make the oil penetrate into the
graphite material, so that the ash powder will not fly
during machining and a smooth surface can be obtained.

2) Paint scribing. After the electrode is rough machined
on the contour surface, a thin layer of white paint shall be
sprayed on the scribing surface before scribing, so that
the lines are clear and convenient for machining.

3) Perform machining.

 

Application:

(1) For electric arc steelmaking furnace

(2) For submerged arc furnace

(3) For resistance furnace

(4) Used to prepare special-shaped graphite products

ITEM	PR	HP	UHP
Electric Resistivity(μΩ·m)	≤8.0	≤7.0	≤6.2
Bending Strength(MPa)	≥10.0	≥10.5	≥10.5
Elestic modulus(GPa)	≤12.0	≤12.0	≤14.0
Bulk Density(g/cm3)	≥1.66	≥1.62	≥1.58
Coefficient of Thermal Expansion(X10-6/ºC)	≤2.7	≤2.4	≤1.5
Ash(%)	≤0.3	≤0.3	≤0.3

Form of processing:

There are mainly three types of graphite electrode machining: pressurized vibration method, CNC automatic forming method and
mechanical processing method.

(1) Pressurized vibration method: the pressurized vibration method requires a special machine tool, and the shape of the electrode
master mold is opposite to that of the electrode. Graphite materials and forming tools are placed relatively during processing, leaving
a certain gap. The processing fluid composed of water and abrasive is injected into the machine. At the same time of passing through
the processing fluid, the graphite and the forming tool are subject to ultrasonic vibration. Under the action of abrasive impact force,
the graphite is stripped to the required shape. The abrasive is SiC, B4C or diamond. The rougher the abrasive is, the faster the
machining speed is. When the machine tool is working, it adopts sealed type and water curtain type for processing. It is suitable for
EDM for mass production.

(2) Numerical control automatic forming method: the numerical control automatic forming method requires a special graphite electrode
forming machine, which adopts the numerical control method, has an automatic tool exchange device, and can accommodate multiple
tools. In order to improve the processing environment, the graphite electrode is surrounded by a water curtain to prevent the graphite
dust from dispersing everywhere. In addition, the wet machining method can also be used to prevent tool wear and graphite dust
dispersion by using water-soluble cutting fluid. The machine tool has a high-performance filtering device, which can separate the
cutting fluid from the graphite chips, and can ensure continuous processing for a long time. It is an ideal special equipment for
graphite electrode processing, and is suitable for electrode processing for moulds. However, its price is relatively high and it is
not widely used in China.

(3) Machining method: the machining method is the main method adopted by domestic general mold manufacturers.
 

Graphite Electrode
Project		Nominal diameter mm
		75~130		150~225		250~300		350~450		500~800
Level		Excellent	-	Excellent	-	Excellent	-	Excellent	-	Excellent	-
Resistivity μΩ·m ≤	Electrode	8.5	10	9	10.5	9	10.5	9	10.5	9	10.5
	Nipple	8		8		8		8		8
Flexural strength MPa ≥	Electrode	10		10		8		7		6.5
	Nipple	15		15		15		15		15
Elastic Modulus GPa ≤	Electrode	9.3		9.3		9.3		9.3		9.3
	Nipple	14		14		14		14		14
Bulk density g/cm3 ≥	Electrode	1.58		1.53		1.53		1.53		1.52
	Nipple	1.7		1.7		1.7		1.7		1.7
Thermal expansion coefficient 10-6/ºC Room temperature ~600ºC ≥	Electrode	2.9		2.9		2.9		2.9		2.9
	Nipple	2.7		2.7		2.8		2.8		2.8
Ash content % ≤		0.5		0.5		0.5		0.5		0.5

 

Company Profile:
 

FAQ:

Q: Are you a trading compnay or manufacture?
A: We're factory.

Q:How long is your delivery time?
A: Generally it will need about 15-20 days if the goods are not in stock. 

Q:Do you provide samples?
A: Yes, we could provide the stock free sample, buyer only pay the freight cost. 

Q:What is the main customers?
A:The main customers are from all over the world.