Silicone Lubricant Oil Spray, Mould Releaser Silicon Oil

• Type: Oil
• Source: Liquid Mineral Lubricants
• Composition: Oil
• Property: High and Low Temperature Lubricating Oil
• Certification: SAE, ACEA, NSF, JASO
• Shape: Liquid
• Application: Industrial Lubricant
• Transport Package: Bag/Bottle/Bag/Drum
• Specification: Customized/200kg/drum
• Trademark: FK
• Origin: China
• Production Capacity: 100000ton/Year

Product Description

 

Product Description

A silicone oil is any liquid polymerized siloxane with organic side chains. The most important member is polydimethylsiloxane. These polymers are of commercial interest because of their relatively high thermal stability, lubricating, and dielectric properties.

It is used in general medicine and surgery. Because of silicone oil's water repellent and lubricating properties, it is considered an appropriate material to maintain surgical instruments.

Features

- High purity

- Chemical inertness

- High water repellency

- Low volatility

- Low surface tension

- Low order of toxicity and skin sensitization

- Resistance to decomposition by heat and oxidation

- Good lubrication characteristics for plastics and rubber MDM Fluid is intended for use in a variety of medical applications including; lubricant for plastic or rubber devices and instruments, inert protective coating and water repellent film on the skin, and a hydrophobic surface on glass and ceramic substrates.

 

Product specifications

Viscosity	Appearance	Flash Point (ºC)	Freezing Point (ºC)	Specific Gravity (25ºC)	VISCOSITYTEMP COEFFICIENT
50 cst	Transparent liquid	≥300	-55	0.96	0.59
100 cst	Transparent liquid	≥300	-55	0.966	0.6
200 cst	Transparent liquid	≥300	-50	0.968	0.6
350 cst	Transparent liquid	≥300	-55	0.97	0.6
500 cst	Transparent liquid	≥300	-55	0.971	0.6
1000 cst	Transparent liquid	≥300	-55	0.971	0.61
5000 cst	Transparent liquid	≥300	-55	0.975	0.61
10000 cst	Transparent liquid	≥300	-60	0.975	0.61

 

Silicone oil emulsion is an important auxiliary agent in the textile finishing segment, which gives the fabric different characteristics, style and feeling. It is especially harsh for the choice of emulsifier. Different emulsifiers can make silicone oil emulsion systems have different emulsified particle sizes, which directly affect the application performance of the emulsion.\

intems index index	201-10	201-50	201-100	201-200	201-500	201-1000
Viscosity(25 °C)mpa.s	10±2	50±5	100±5	200±10	500±50	1000±80
Flash point ≥°C)	160	270	310	310	310	310
Specific gravity(25°C)g/cm3	0.930-0.940	0.955-0.965	0.960-0.970	0.962-0.972	0.965-0.975	0.967-0.975
Volatile content	1.5	1.0	1.0	1.0	1.0	1.0

 DY-201 Two dimethyl silicone oil, chemical name is Polydimethylsiloxane, which formula is (CH3)3SiO[(CH3)2SiO]n-Si(CH3)3, this products is a kind of transparent, colourless polydimethylsilixane liquid, available viscosities ranging from 5cps to 2000000cps.

-  Little change in physical properties over a wide temperature span - arelatively flat viscosity-temperature slope, and serviceability from  -50°C up to 200°C.

-  Excellent water repellency.

-  Good dielectic properties over a wide range of temperatures and frequencies.

-  Low surface tension - readily wets clean surfaces to impart water repellency and release characteristics.

-   Viscosities above 10 mm²/s also exhibit heat stability, oxidation resistance, very low vapour pressures, and high flash point.

-   Low order of toxicity

-   Essentially odourless

-   Soluble in a wide range of solvent

Recommended emulsifiers] IT Emulsification System; IPL Emulsification System

IT Series	1303	1305	1306	1307	1308	1309	1310
Hydroxyl No.	167.0±5	135.0±5	120.0±5	110.0±5	100.0±5	95.0±5	90.0±4
Cloud Point,ºC	50.5B	65.0B	70.5B	75.0B	48.0A	56.0A	75.0A
pH	5.0-7.0	5.0-7.0	5.0-7.0	5.0-7.0	5.0-7.0	5.0-7.0	5.0-7.0
Pour Point,ºC	-15	1	5	8	15	13	19
HLB	9	10.5	11	12	13	13.5	14
Surface Tension,mN/m	26.71	27.02	27.03	27.09	27.87	28.38	28.76
CMC,ppm		32.22	47.8	52.18	79.4		117.9
Wetting,s	245	70	45	60	65	75	70
Foaming,mm	90	103	166	166	163	172	169
Emulsifing,s	650	990	1345	1355	1410	1225	1155

Test methods A: 1 1 g surfactant + 100 g water B: 5 g surfactant + 45 g 25 % soln. of butyldiglycol C :1 g surfactant + 100 g 5 % soln. of NaCl

 

 

Packaging & Shipping

 

FAQ
Q 1 What are your payment terms?
According to our sales policy, 50% of T/T as a deposit should be paid before the order, and the remaining 50% should be completed
before shipment. We can provide you with real photos or videos of the goods before the balance payment.

Q 2. What is your delivery time?
Generally, it takes 15 to 30 days after receiving the full payment. The actual delivery date will depend on the type of lubricant
and the quantity of your order.

Q 3. What are your delivery terms?
Provide EXW, FOB, CFR or CIF.
 

Q 4. What is the packaging of the grease?
Usually, it is packed in different sizes of barrels, PE bags, cans or barrels, depending on your final requirements.

Q 5. Can I get some samples from you?
Of course, we will provide free samples, but you need to pay for shipping.

Q6. Can we do ODM or OEM for us?
We are very happy to do so. Let us know your specific requirements, including grease color and dropping point.
If necessary,please provide us with your samples, which will help us to test.